Fibreways Technology

Supply of 0.5 MM , Providing PPGL Hi-Rib Trapezoidal profile sheets AZ-150 (size, shape and pitch of corrugation as approved by Engineer-incharge) 0.50 mm (+ 0.05 %) as per IS: 277, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protectiveguard film of 25 microns minimum to avoid scratches during transportation andshould be supplied in single length upto12 metre or as desired by Engineer in charge,complete upto any pitch inhorizontal/ vertical or curved surfaces,rafters and trusses and including cuttingto size and shape wherever required, also required make printed with sheet,Supply width 1070mm.

PEB structure packaging involves systematically bundling pre-engineered steel components—primary frames (columns/rafters), secondary members (purlins/girts), and cladding—for transport from factory to site.

Supply of Precoated Galvanised Iron Profile Sheets (size, Shape and Pitch of corrugation as approved by Engineer-in-charge) 0.50mm (+0.05%) total coated thickness with zinc coating 120 GSM as per IS : 277, in 240 MPA steel grade, 5-7 microns have protective on both side of the sheet and polyester top coat 15-18 microns. Sheet be supplied in single length upto 12 meter or as desired by Engineer- in- charge. The sheet shall be fixed using self-drilling/ self-tapping screws of size (5.5 x 55 mm) with EPDM seal, complete up to any pitch in horizontal. vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 

a) Designing of Pre-Engineered Buildings System as per Approved drawing:-Providing, fabricating, erecting, placing in position Pre-engineered roofstructure with plates, bracings, stiffeners etc. in roof trusses, columns, portalframes, beams, bracings, gutter and Rain water pipes. The work shall includepainting to structural steel work with primer & paint of approved quality &make. All complete as directed & instructed by Owner/Engineer.Including below items. : -b) ANCHOR BOLTS (FOUNDATION BOLTS)Supplying & fixing anchor bolts in RCC pedestals including welding whereverrequired. (Maximum allowable tolerance 3mm c/c of any two bolts) as perdrawings (template to b e provided by us) including the cost of nut & washersas per directions of Engineer-in-charge.c) PURLINSProviding & Fixing (GI & Factory Made) Purlins made of High Tensile ZSectionswith minimum yield strength of 240 Mpa and Hot Dip Galvanizedwith thickness of as per IS 277.

COLOUR COATED GALVALUME ROOFING/ CLADDING SHEETa) Supply & installation of 0.50 mm total color coated thickness (TCT)precoated profile sheet made of coiled rolled steel substrate550mpayield strength, with Al-Zinc Alloy coat on both sides, andfinished with Primer + Coat RMP Coating, of size, shape & pitch ofcorrugation as approved by Engineer - in -charge. Sheets should besupplied in single length up to 12 meter or as desired by Engineer - in -charge. The sheet shall be fixed using self-drilling /self-tapping screwsof size(5.5x 55mm) with Plastic self-drilling screw cap & EPDM seal orwith polymer &filled with white lead complete up to any pitch inhorizontal/vertical or curved surface excluding the cost of purlins,rafters & trusses & including cutting o size & shape whereverrequired.( JSW)b) SHEETING ACCESSORIES :- Providing and fixing precoated sheet roofing accessories with samespecification as above item. (Cladding + Roofing) Ridge plain(500-600mm) Flashing(500-600mm) Gutter to be designed as per calculation of Run off & should be min.made by 0.50mm thick plain sheets. Upto 610 mm Girth.

Supply & Fixing of Aluminium Air Bubble for Insulation in 20mm thickness

As a premier manufacturer, we specialize in PEB Structure Shed Fabrication, providing robust, customizable, and cost-effective solutions for industrial, commercial, and agricultural applications. Our sheds are designed for durability, quick installation, and low maintenance, ensuring optimal performance and longevity in diverse environments.

PRE-ENGINEERED BUILDING STRUCTUREa) Designing of Pre-Engineered Buildings System as per Approved drawing:-Providing, fabricating, erecting, placing in position Pre-engineered roofstructure with plates, bracings, stiffeners etc. in roof trusses, columns, portalframes, beams, bracings, gutter and Rain water pipes. The work shall includepainting to structural steel work with primer & paint of approved quality &make. All complete as directed & instructed by Owner/Engineer.Including below items. : -b) ANCHOR BOLTS (FOUNDATION BOLTS)Supplying & fixing anchor bolts in RCC pedestals including welding whereverrequired. (Maximum allowable tolerance 3mm c/c of any two bolts) as perdrawings (template to b e provided by us) including the cost of nut & washersas per directions of Engineer-in-charge.c) PURLINSProviding & Fixing (GI & Factory Made) Purlins made of High Tensile ZSectionswith minimum yield strength of 240 Mpa and Hot Dip Galvanizedwith thickness of as per IS 277.
COLOUR COATED GALVALUME ROOFING/ CLADDING SHEETa) Supply & installation of 0.50 mm total color coated thickness (TCT)precoated profile sheet made of coiled rolled steel substrate550mpayield strength, with Al-Zinc Alloy coat on both sides, andfinished with Primer + Coat RMP Coating, of size, shape & pitch ofcorrugation as approved by Engineer - in -charge. Sheets should besupplied in single length up to 12 meter or as desired by Engineer - in -charge. The sheet shall be fixed using self-drilling /self-tapping screwsof size(5.5x 55mm) with Plastic self-drilling screw cap & EPDM seal orwith polymer &filled with white lead complete up to any pitch inhorizontal/vertical or curved surface excluding the cost of purlins,rafters & trusses & including cutting o size & shape whereverrequired.( JSW)b) SHEETING ACCESSORIES :- Providing and fixing precoated sheet roofing accessories with samespecification as above item. (Cladding + Roofing)