Fibreways Technology

As a premier manufacturer, we specialize in PEB Structure Shed Fabrication, providing robust, customizable, and cost-effective solutions for industrial, commercial, and agricultural applications. Our sheds are designed for durability, quick installation, and low maintenance, ensuring optimal performance and longevity in diverse environments.

Structural Steel Frame:

• The frame of a PEB is typically made of steel (usually mild steel or high-strength steel) and is pre-engineered to meet specific load-bearing and safety requirements. The steel is cut, welded, and fabricated in the factory to precise measurements before being transported to the site.

a) Designing of Pre-Engineered Buildings System as per Approved Drawing:-Providing, fabricating, erecting, placing in position Pre-engineered roof structure with plates, bracings, stiffeners etc. in roof trusses, columns, portal frames, beams, bracings, gutter and Rain water pipes. The work shall include painting to structural steel work with primer & paint of approved quality & make. All complete as directed & instructed by Owner/Engineer.Including below items. : -b) ANCHOR BOLTS (FOUNDATION BOLTS)Supplying & fixing anchor bolts in RCC pedestals including welding wherever required. (Maximum allowable tolerance 3mm c/c of any two bolts) as per drawings (template to b e provided by us) including the cost of nut & washers as per directions of Engineer-in-charge.c) PURLINSProviding & Fixing (GI & Factory Made) Purlins made of High Tensile Z-Sections with minimum yield strength of 240 Mpa and Hot Dip Galvanized with thickness of as per IS 277
COLOUR COATED GALVALUME ROOFING/ CLADDING SHEETa) Supply & installation of 0.50 mm total Color Coated thickness (TCT) Precoated Profile Sheet (PPGL) made of coiled rolled steel substrate 550mpayield strength, with Al-Zinc Alloy coat on both sides 150 GSM, in Pitch -200mm + Crest height 25-30 RMP Coating, as approved by Engineer - in -charge. Sheets should be supplied in single length up to 12 meter or as desired by Engineer - in - charge. The sheet shall be fixed using self-drilling /self-tapping screws of size(5.5x 55mm) with Plastic self-drilling screw cap & EPDM seal or with polymer &filled with white lead complete up to any pitch in horizontal/vertical or curved surface excluding the cost of purlins, rafters & trusses & including cutting o size & shape wherever required.( JSW) Estimated Quantity

b) SHEETING ACCESSORIES :-• Providing and fixing precoated sheet roofing accessories 0.5 mm thick PPGL Sheet with same specification as above item for (Cladding + Roofing) Ridge, Corner, Apron,Gutter upto 610mm Girth.• Gutter to be designed as per calculation of Run off & should be min. made by 0.50mm thick plain sheets. Upto 610 mm Girth.

a) Designing of Pre-Engineered Buildings System as per Approved Drawing:-Providing, fabricating, erecting, placing in position Pre-engineered roof structure with plates, bracings, stiffeners etc. in roof trusses, columns, portal frames, beams, bracings, gutter and Rain water pipes. The work shall include painting to structural steel work with primer & paint of approved quality & make. All complete as directed & instructed by Owner/Engineer.Including below items. : -b) ANCHOR BOLTS (FOUNDATION BOLTS)Supplying & fixing anchor bolts in RCC pedestals including welding wherever required. (Maximum allowable tolerance 3mm c/c of any two bolts) as per drawings (template to b e provided by us) including the cost of nut & washers as per directions of Engineer-in-charge.

c) PURLINSProviding & Fixing (GI & Factory Made) Purlins made of High Tensile Z-Sections with minimum yield strength of 240 Mpa and Hot Dip Galvanized with thickness of as per IS 277.
COLOUR COATED GALVALUME ROOFING/ CLADDING SHEETa) Supply & installation of 0.50 mm total Color Coated thickness (TCT) Precoated Profile Sheet (PPGL) made of coiled rolled steel substrate 550mpayield strength, with Al-Zinc Alloy coat on both sides 150 GSM, in Pitch -200mm + Crest height 25-30 RMP Coating, as approved by Engineer - in -charge. Sheets should be supplied in single length up to 12 meter or as desired by Engineer - in - charge. The sheet shall be fixed using self-drilling /self-tapping screws of size(5.5x 55mm) with Plastic self-drilling screw cap & EPDM seal or with polymer &filled with white lead complete up to any pitch in horizontal/vertical or curved surface excluding the cost of purlins, rafters & trusses & including cutting o size & shape wherever required.( JSW) Estimated Quantity


b) SHEETING ACCESSORIES :-• Providing and fixing precoated sheet roofing accessories 0.5 mm thick PPGL Sheet with same specification as above item for (Cladding + Roofing) Ridge, Corner, Apron,Gutter upto 610mm Girth.• Gutter to be designed as per calculation of Run off & should be min. made by 0.50mm thick plain sheets. Upto 610 mm Girth

Pre-Engineered Building (PEB) packaging involves wrapping custom-fabricated steel and paneling into weather-resistant, tightly secured bundles. This preparation allows for safe transit, unloading, and storage at your site. Proper packaging prevents corrosion, scratching, and bending before the construction phase

a) Designing of Pre-Engineered Buildings System as per Approved drawing:-Providing, fabricating, erecting, placing in position Pre-engineered roofstructure with plates, bracings, stiffeners etc. in roof trusses, columns, portalframes, beams, bracings, gutter and Rain water pipes. The work shall includepainting to structural steel work with primer & paint of approved quality &make. All complete as directed & instructed by Owner/Engineer.Including below items. : -b) ANCHOR BOLTS (FOUNDATION BOLTS)Supplying & fixing anchor bolts in RCC pedestals including welding whereverrequired. (Maximum allowable tolerance 3mm c/c of any two bolts) as perdrawings (template to b e provided by us) including the cost of nut & washersas per directions of Engineer-in-charge.c) PURLINSProviding & Fixing (GI & Factory Made) Purlins made of High Tensile ZSectionswith minimum yield strength of 240 Mpa and Hot Dip Galvanizedwith thickness of as per IS 277.
COLOUR COATED GALVALUME ROOFING/ CLADDING SHEETa) Supply & installation of 0.50 mm total color coated thickness (TCT)precoated profile sheet made of coiled rolled steel substrate550mpayield strength, with Al-Zinc Alloy coat on both sides, andfinished with Primer + Coat RMP Coating, of size, shape & pitch ofcorrugation as approved by Engineer - in -charge. Sheets should besupplied in single length up to 12 meter or as desired by Engineer - in -charge. The sheet shall be fixed using self-drilling /self-tapping screwsof size(5.5x 55mm) with Plastic self-drilling screw cap & EPDM seal orwith polymer &filled with white lead complete up to any pitch inhorizontal/vertical or curved surface excluding the cost of purlins,rafters & trusses & including cutting o size & shape whereverrequired.( JSW)b) SHEETING ACCESSORIES :- Providing and fixing precoated sheet roofing accessories with samespecification as above item. (Cladding + Roofing) Ridge plain(500-600mm) Flashing(500-600mm) Gutter to be designed as per calculation of Run off & should be min.made by 0.50mm thick plain sheets. Upto 610 mm Girth.

Pre-Engineered Building (PEB) structures are modern steel building systems designed and fabricated in a factory, then transported and assembled on-site

COLOUR COATED GALVALUME ROOFING/ CLADDING SHEETa) Supply & installation of 0.50 mm total color coated thickness (TCT)precoated profile sheet made of coiled rolled steel substrate550mpayield strength, with Al-Zinc Alloy coat on both sides, andfinished with Primer + Coat RMP Coating, of size, shape & pitch ofcorrugation as approved by Engineer - in -charge. Sheets should besupplied in single length up to 12 meter or as desired by Engineer - in -charge. The sheet shall be fixed using self-drilling /self-tapping screwsof size(5.5x 55mm) with Plastic self-drilling screw cap & EPDM seal orwith polymer &filled with white lead complete up to any pitch inhorizontal/vertical or curved surface excluding the cost of purlins,rafters & trusses & including cutting o size & shape whereverrequired.( JSW)b) SHEETING ACCESSORIES :- Providing and fixing precoated sheet roofing accessories with samespecification as above item. (Cladding + Roofing) Ridge plain(500-600mm) Flashing(500-600mm) Gutter to be designed as per calculation of Run off & should be

Pre fabricated Hospitals